Multidisciplinary engineering solutions • Uganda & East Africa
Roads & bridges

Geogrids – Understanding Types, Installation Process, and Technical Properties.

Geogrids are high-strength polymeric materials used in modern civil engineering to stabilize soil, reinforce foundations, and prevent surface shifting under heavy structural loads. By interlocking aggregate particles and redistributing tensile forces across a broad surface area, geogrids provide robust, cost-effective solutions for roads, retaining walls, and slope stabilization.

Geogrid Use in Road Tarmacking
On this page · 6 sections
  1. The main functions of geogrids include, but not limited to
  2. Polymer material and environmental durability
  3. Strengthening soil stability
  4. Provide soil filtration and drainage functions
  5. Preventing soil erosion
  6. Improving engineering construction efficiency

Geogrids are polymeric materials with an open-grid structure designed to interact with soil or aggregate. These high-strength polymer or composite mesh materials are used in civil engineering to reinforce soil, lock aggregate particles in place, and distribute heavy loads across a wider area. They have high tensile strength and a higher elastic modulus than soil, allowing them to distribute loads more effectively and provide reinforcement in construction applications than they otherwise would. Using geogrids in civil engineering applications helps to stabilize and reinforce ground surfaces, effectively preventing soil and aggregate layers from shifting under heavy, repetitive, or structural loads. While soil naturally possesses strong compressive strength, it has incredibly weak tensile strength and easily pulls apart under heavy weight. Geogrids solve this structural limitation by stepping in to absorb and redistribute tensile forces across a vastly broader surface area. This makes geogrids essential geosynthetic materials in modern civil engineering in providing robust solutions for soil stabilization, reinforcement, and erosion control.

With global infrastructure spending projected to reach $9.5 trillion by 2030, driven by urbanization and sustainability demands (Geosynthetics Magazine, 2024), geogrids are critical for projects like road construction, retaining walls, and landfill management. The global geogrid market reached approximately USD 1.52 billion in 2025 and is projected to grow to USD 1.88 billion by 2030 at a CAGR of 4.29% (Mordor Intelligence), driven by increasing infrastructure investments, urbanization, and the need for sustainable construction solutions.

The main functions of geogrids include, but not limited to.

  • Reinforcement. Enhance foundation bearing capacity and reduces settlement.
  • Separation. Prevent intermixing of different particle sizes in fill materials.
  • Confinement. Lock soil particles to reduce lateral displacement.
  • Drainage (for certain types). Facilitate water discharge to lower pore water pressure.

The original concept of a geogrid was put forth by Dr. Frank Brian Mercer through the patented ‘Netlon Process’ in the late 1950s and early 1960s, and he patented his design in 1978. The Netlon Process involves melting polymer and extruding it through a specialized die to produce a net structure that is integral in design.

At SANKOFA, we supply bulk orders of geogrids and related geosynthetic products, such as.

  • Non-woven geotextile fabrics.
  • HDPE geomembrane liners (pond liners).
  • Geocells.
  • Geonets.
  • Geogrids.
  • Gabion mesh.
  • Geosynthetic clay liners (GCLs).
  • Geomats.
  • Cement blankets.
  • Drainage boards.
  • Geotubes.
  • Hessian jute cloths.
  • Geobags.

Technical Properties of Geogrids Explained.

Geogrids are defined by their structural and performance characteristics, ensuring 90–98% reliability in geotechnical applications, per ASTM D5818. The technical properties of geogrids are categorized into physical, mechanical, and chemical/environmental characteristics.

Physical Properties.

  • Ribs and apertures. The solid plastic strands are called ribs, while the open holes between them are apertures. Apertures allow gravel or soil particles to strike through and "lock" in place. The aperture shape governs the direction of load distribution.
  • Uniaxial. Elongated rectangles providing high strength in one direction.
  • Biaxial. Squares/rectangles providing strength in two directions.
  • Triaxial/hexagonal. Triangular apertures providing multidirectional, 360° radial stiffness.
  • Rib thickness and profile. The cross-sectional dimensions of the polymer strands that form the grid network.
  • Mass per unit area (weight). The density or weight of the geogrid material (g/m²).
  • Flexural rigidity. The stiffness of the grid joints and ribs, which dictates how well the grid resists bending and maintains its flat shape during aggregate placement.

Mechanical Properties.

  • Ultimate tensile strength (kN/m). The maximum tensile load a geogrid can withstand per unit width before failing or snapping.
  • Elongation at ultimate tensile strength (%). The percentage of stretch the geogrid undergoes when pulled to its maximum tensile breaking point.
  • Junction strength/efficiency (%). The strength of the joint (node) where the ribs cross or connect, relative to the strength of the rib itself.
  • Radial stiffness. The ability of the grid to resist pulling or stretching forces uniformly across all angles.
  • Creep resistance. The ability of the polymer to maintain load without continuous deformation or stretching over long periods.
  • Interface friction. The frictional resistance between the geogrid surface and the surrounding soil or aggregate particles.
  • Installation damage resistance (ASTM D5818). The ability of the grid to withstand being run over by heavy machinery and sharp-edged crushed stone during construction without losing structural integrity.

Chemical and Environmental Properties.

  • Chemical resistance (ASTM D6703). Resistance to degradation from soil acids, alkalis, salts, and aggressive chemicals present in the ground.
  • Biological resistance. Immunity to attack, rotting, or breakdown from bacteria, fungi, or soil microorganisms.
  • UV degradation resistance. Carbon black or special stabilizers added to the polymer resin to resist breakdown from ultraviolet (sunlight) exposure prior to soil coverage.
  • Thermal stability. The ability to retain structural performance across extreme operating temperatures (typically ranging from -40°C to 60°C).

Main Types of Geogrids.

Geogrids are mainly categorized by structural orientation and manufacturing style.

Types by Structural Orientation (Pattern).

  • Uniaxial geogrids. Designed with long, narrow apertures to handle stress in a single direction (the longitudinal machine direction). They feature long, oval apertures. They are primarily utilized in vertical or steep slope applications, such as retaining walls and embankments.
  • Biaxial geogrids. Feature uniform rectangular apertures designed to handle and distribute stress equally in two directions (longitudinal and transverse). They typically feature square or rectangular apertures. They are commonly chosen for horizontal foundations like road bases and runways.
  • Triaxial and multiaxial geogrids. Engineered with triangular or hexagonal structures to provide a full 360-degree, multi-directional load distribution. This geometry offers superior stiffness and stability for demanding structural loads.

Types by Manufacturing Process.

  • Extruded geogrids. Made by punching holes in flat sheets of high-density polyethylene (HDPE) or polypropylene (PP) and then stretching the sheet under controlled temperatures. This process aligns the molecular structure to maximize tensile resistance.
  • Woven/warp knitted geogrids. Manufactured by weaving high-tenacity polyester (PET) or synthetic yarns into a mesh pattern and coating them with a protective polymer layer (like PVC or bitumen). They offer high flexibility and custom high-load capacities.
  • Bonded (welded) geogrids. Formed by joining or welding individual polymer strands or straps at right angles to create stable load-bearing grids for soft subgrades.

How Geogrids Work.

A geogrid works through particle confinement and mechanical interlock. When a load is applied to a mechanically stabilised soil layer, the geogrid and soil act as a single composite material. The geogrid's open apertures confine particles, allowing them to mechanically interlock with the grid's ribs, forming a mechanically stabilised layer of soil and preventing lateral movement.

Rather than relying on a tensioned membrane effect, modern stabilisation geogrids work through lateral restraint. The aggregate particles become interlocked within the geogrid apertures, creating a confinement effect. This interaction increases the shear strength of the aggregate layer, making it significantly more resistant to lateral displacement and permanent deformation.

By confining the particles, the geogrid creates a mechanically stabilised layer that distributes applied loads over a much wider area of the subgrade. This improves the overall stiffness and bearing capacity of the platform or road pavement, leading to a more durable structure and a longer service life.

Overall, geogrids strengthen roads and foundations by providing mechanical interlocking, lateral restraint, and tensioned membrane support to distribute heavy loads over a wider area. Instead of behaving like a simple cushion, a geogrid acts as a rigid skeleton beneath the surface. When gravel or soil is compacted over it, the particles lock tightly into the grid's open spaces (apertures), turning loose material into a solid, reinforced composite layer.

Installation Process for Geogrids.

Understanding how to install geogrid is essential for contractors and project owners who need reliable soil reinforcement for roads, driveways, retaining structures, and weak subgrades. Correct placement helps develop effective aggregate–geogrid interaction, improve load distribution, and reduce deformation. Before installation, confirm the geogrid type, reinforcement direction, overlap requirements, fill material, and project specifications.

Prepare the subgrade.

  • Remove debris, roots, sharp objects, and other materials that could damage the geogrid. Level major irregularities and address unsuitable areas according to the project design.
  • On very weak subgrades, excessive construction traffic or disturbance should be avoided. Site preparation should provide a suitable working surface without unnecessarily reducing the bearing capacity of the existing ground.
Position the geogrid.
  • Unroll the geogrid directly over the prepared surface. Keep it flat and reasonably taut, avoiding wrinkles, folds, or excessive slack.
  • For products with a defined primary strength direction, confirm the correct orientation before placement. Geogrid orientation is particularly important in applications such as retaining walls and reinforced slopes.
Provide the required overlap.
  • Adjacent rolls should overlap sufficiently to maintain continuity during construction. The required overlap depends on subgrade strength, geogrid type, construction conditions, and project specifications.
  • Rather than applying one overlap dimension to every project, follow the engineering design and manufacturer recommendations. Weak or unstable subgrades may require larger overlaps or additional securing measures.
Place the fill material.
  • Place approved aggregate or backfill over the installed geogrid without allowing construction equipment to travel directly on the exposed material unless specifically permitted.
  • Spread the fill progressively to avoid displacing or damaging the grid. Appropriate aggregate gradation can promote interlock with the apertures and contribute to reinforcement performance.
Compact the reinforced layer.
  • Compact the fill according to the required density and project specifications. Proper compaction helps develop interaction between the geogrid and surrounding aggregate or soil.
  • Before installing additional layers, inspect the area for displaced, folded, exposed, or damaged sections.

Main Considerations in Choosing the Best Geogrid.

Selecting the right geogrid ensures project success, cost savings, and long-term performance. Key factors considered in selection of geogrids include.

Polymer material and environmental durability.

  • Polymer composition. Common materials include High-Density Polyethylene (HDPE), Polypropylene (PP), and Polyester (PET), often coated with PVC or latex for environmental protection.
  • Chemical and UV resistance. Evaluate resistance to soil pH, aggressive chemicals (such as in landfills or industrial sites), and ultraviolet (UV) degradation if the grid is exposed to sunlight during installation.
  • Design lifespan. Match the polymer durability to the project's required design life (e.g., up to 100-year lifespans for critical infrastructure like highways and retaining walls).
Application and load direction (uniaxial vs. Biaxial).

The way a geogrid distributes stress determines whether it is suited for walls, slopes, or roadways.

  • Uniaxial geogrids. Designed with dominant strength in a single direction (along the roll length). They are the industry standard for retaining walls and steep slope reinforcement, where the load is predominantly transverse to the wall length.
  • Biaxial and triaxial geogrids. Offer equal or multi-directional tensile strength along both roll length and width. These are required for road construction, pavements, and foundations to handle dynamic, multi-directional vehicular loads.
Subgrade strength (CBR Value).

The California Bearing Ratio (CBR) of the native soil dictates the required stiffness and tensile strength of the geogrid.

  • CBR < 1% (extremely soft soil). Requires a high-modulus biaxial or triaxial geogrid with a high ultimate tensile strength (typically ≥ 12–16 kN/m at 2% strain) and extensive overlaps (≥ 900 mm) to prevent failure in marshlands or peat.
  • CBR 1% – 3% (very weak subgrade). Commonly found in rural and access roads. Standard high-stiffness biaxial geogrids (8–12 kN/m at 2% strain) are selected here to optimize load distribution.
  • CBR > 3% (firm subgrade). Geogrids are chosen primarily to reduce the required aggregate base thickness and extend the pavement's design life.
Aperture size and geometry (mechanical interlock).

Geogrids stabilize structures by locking aggregate particles into their open grids (apertures).

  • Aggregate matching. The aperture size must be tightly matched to the gradation of the fill material. If the grid holes are too small or too large for the gravel size, the stones will not lock properly, causing sideways movement and structural shifting.
  • Confinement and stiffness. High junction efficiency and rigid geometry ensure the grid maintains its shape under immense lateral restraint and load distribution forces.
Installation and external factors.
  • Separation needs. Geogrids provide structural reinforcement but do not prevent fine mud or water from mixing into clean aggregate. If fines migration or drainage is a risk, engineers must pair the geogrid with a separate geotextile fabric.
  • Statistical confidence. Technical datasheets should express mechanical values (like tensile strength) with a minimum 95% statistical confidence level, ensuring supplied rolls meet or exceed listed attributes on site.
Compatibility with soil types.

A geogrid that is compatible effectively with the surrounding soil is a suitable choice for reinforcement operations. Different soil types have varying properties, such as grain size and drainage properties. For effective interlock, the aperture size of the ideal geogrid should match the grain size of the soil. This will create enough friction and confinement to stop soil movement inside the reinforced area.

Ease of installation.

Efficient installation leads to reduced project costs and completion within stipulated deadlines. Factors like roll width, weight, and the ability to unroll and lay flat can impact installation speed. Geogrids with features that reduce on-site cutting and require less manpower for deployment are generally preferred by engineers.

Elongation and stress-strain values.

Elongation is defined by the amount a material stretches when put under stress. In geogrids, low elongation is preferable as it maintains the integrity of the reinforced soil mass. Geogrids that elongate excessively under load do not confine the soil adequately.

Project requirements.

The specific deployment of the geogrid influences the selection process. To illustrate, uniaxial geogrids which possess high tensile strength in one direction are suitable for walls and slopes, while biaxial geogrids (offer strength in both directions) are plied in roads and pavements.

Resistance to chemicals.

The geogrid should exhibit resistance to chemical degradation from the surrounding soil and other contaminants. Chances of premature failure are negated and a sustained performance is ensured.

Advantages of Using Geogrids.

The integration of geogrids in civil engineering projects offers a variety of crucial advantages, both structurally and economically.

Strengthening soil stability.

Geogrid acts as reinforcement that resists the tensile forces caused by construction loads. With geogrid, loads are distributed more evenly so that soft soil can support heavy structures such as highways, railways, and embankments.

Provide soil filtration and drainage functions.

The geogrid has certain water permeability, which can filter the particles in the soil, and remove excess water to prevent ponding and soil liquefaction. This helps to maintain good drainage performance of the soil and prevent soil erosion and landslides.

Preventing soil erosion.

Geogrids can be used to prevent soil erosion on slopes, river banks, lake embankments, and other areas. It can effectively resist the impact of water currents and waves, slow down the erosion rate of rivers and oceans, and protect the integrity of soil.

Improving engineering construction efficiency.

The use of geogrids can simplify the construction process, reduce the amount of earthwork excavation and filling, and save labor and time costs. It can also be constructed under complex terrain conditions, improving the efficiency of engineering construction.

Durability and sustainability.

Geogrids typically have a long service life and can withstand long-term natural and environmental erosion. It has properties of UV resistance and chemical corrosion resistance, and can maintain stability under different climate and soil conditions.

Deformation control (rutting control).

On asphalt roads, rutting caused by heavy traffic is common. Geogrid reduces deformation by restraining aggregate movement, so the road surface lasts longer.

Steep slope stabilization.

With geogrid, slopes can be built steeper without the risk of landslides. Geogrid increases the shear resistance of the soil, so the slope stays stable even at a sharp angle.

Final Thoughts.

Geogrids are indispensable for modern infrastructure and are highly valuable materials in civil engineering, road construction, agriculture, industrial development, and environmental protection. 

Selecting the optimal geogrid for a project requires diligent planning and consideration of all key factors. This applies whether for projects across roads, retaining walls, slopes, railroads, civil infrastructure, landfills, and mining. For reliable performance, geogrid choice should always be based on engineering principles rather than simplified rules of thumb. Choosing the right geogrid tailored to a specific project can significantly lower costs and enhance the longevity and performance of infrastructure. In Uganda, SANKOFA remains a trusted partner for geogrid products; and our geotechnical engineers offer objective expert technical guidance to enable clients move their projects forward with confidence, based on informed opinions tailored to their project’s unique conditions and demands. 

KEEP READING

More engineering insights.

ENGINEERING STARTS WITH A CONVERSATION

Have an engineering challenge?

Tell our team what you need. We will review the scope and prepare the next steps.

Request a proposal ↗
WhatsApp us